☰ Menu
FlapFit UK › Guides
Fits your door, your wall, your cat

Cat flap for a composite door: what fits, what it costs you in warranty

Most microchip cat flaps will physically fit a composite door, because the slab is only about 44 to 48 mm thick. The harder question is the door warranty, since cutting a finished door often voids it. This page shows the cut-out sizes, which models make sense and how to decide between retrofitting and a factory-prepared door.

Find your match →
Independently researchedSources linkedNo extra cost to youLast checked: 2026-11-18

As an Amazon Associate we earn from qualifying purchases. This does not change your price.

Find the right route for your composite door in four questions

  1. Is the door new, on order or already installed?If you are still ordering, ask the maker for a factory-cut opening. Some makers will prepare the slab and keep the warranty, others will not. Get the answer in writing. If the door is already installed, ask the maker what a retrofit does to the guarantee before you cut anything.
  2. Where exactly can the hole go?Composite slabs have a timber or foam core, and steel or aluminium reinforcement at stress points. Keep clear of the lock area and any glazing. Ask the door maker or fitter where reinforcement sits.
  3. How big is your cat, and how many cats use the flap?Compare the flap opening, not the outer frame. The SureFlap Microchip Cat Flap opens 142 x 120 mm. The Cat Mate Elite 355W opens 145 x 145 mm. Large or heavy cats may need the bigger SureFlap Pet Door. The Cat Mate Elite 355W supports up to 9 cats.
  4. Do you need a timer, an app or just microchip access?The Cat Mate Elite 355W has a timer for curfews and runs on 4 AA batteries. The SureFlap Connect version needs the separate Hub on your router for app control. If you only want to keep other cats out, the standard SureFlap is enough.

Quick reference

ModelFlap opening (W x H)Cut-out in door (W x H)Tunnel or lining depthFit for a 44 to 48 mm composite slabNotes
SureFlap Microchip Cat Flap (also DualScan, Connect)142 x 120 mm165 x 171 mm70 mm tunnel, extenders add 50 mm eachYes, slab is thinner than the tunnel. Use the screw length that suits your slabDo not cut or drill the tunnel. Use the supplied template
SureFlap Microchip Pet Door (also Connect)Larger than the cat flap, see maker's specUse the maker's template, we did not verify the size70 mm tunnel, extenders add 50 mm eachYes, same tunnel depth as the cat flapFor big cats. Needs more door area, so check reinforcement
Cat Mate Elite Microchip Cat Flap with Timer (355W)145 x 145 mm178 x 204 mmSelf-lines up to 100 mmYes, well inside the 100 mm rangeTimer, LCD, 4 AA batteries, up to 9 cats. Not dual scanning

Our picks

Top pick
SureFlap Microchip Cat Flap
Illustration

SureFlap Microchip Cat Flap

For: Average cats, one or several, where you want a proven microchip flap with a clear template and a tunnel that suits a 44 to 48 mm slab.

The cut-out is 165 x 171 mm and the tunnel is 70 mm. The maker supplies a template and several screw lengths. Choose the Connect version only if you want the app and are happy to add the Hub.

Price range: Check the current price on Amazon (affiliate link, we may earn a commission). We did not verify prices.

View on AmazonAd
SureFlap Microchip Pet Door
Illustration

SureFlap Microchip Pet Door

For: Large or heavy cats that struggle with the standard opening.

Same system and tunnel depth as the cat flap with a bigger opening. The bigger hole puts more demand on the slab, so ask your door maker about reinforcement first.

Price range: Check the current price on Amazon (affiliate link, we may earn a commission). We did not verify prices.

View on AmazonAd
Cat Mate Elite Microchip Cat Flap with Timer Control 355W
Illustration

Cat Mate Elite Microchip Cat Flap with Timer Control 355W

For: Households that want a curfew timer and a 145 x 145 mm opening.

It self-lines up to 100 mm, so a composite slab needs no extras. The cut-out is 178 x 204 mm. It reads the microchip but is not dual scanning. SureFlap's DualScan reads both chip frequencies, so check which one your cat's chip uses if you are unsure.

Price range: Check the current price on Amazon (affiliate link, we may earn a commission). We did not verify prices.

View on AmazonAd

Our take

For a new door, we would order the opening cut at the factory and get the warranty confirmation in writing. For an existing door, we think retrofitting only makes sense if the door maker explicitly allows it or the warranty has already run out. For most cats we would pick the SureFlap Microchip Cat Flap, because cut-out, tunnel and template are clearly documented. The Cat Mate Elite 355W is our choice if you want a curfew timer. For large cats, the SureFlap Pet Door is an option, but ask the door maker about reinforcement first.

Common buying mistakes

  • Cutting the slab before asking the door maker in writing what it does to the warranty.
  • Choosing a flap by the outer frame size instead of the flap opening, then finding the cat will not fit through.
  • Cutting where reinforcement or the lock area runs. Get the position confirmed first.
  • Buying tunnel extenders or wall liners for a normal 44 to 48 mm slab. They are for walls.
  • Cutting or drilling the SureFlap tunnel. The manual says not to.
  • Leaving the cut edge unsealed. Moisture can reach the core. Ask your door maker which sealant they accept.

Good to know

Can you put a cat flap in a composite door?

Technically yes. A composite slab is a GRP skin over a foam or timber core, and a jigsaw and the maker's template will get a hole through it. The real issue is what the cut does afterwards. Door firms disagree on this. Astraframe says it will not honour the warranty on a door modified with a cat flap. KJM Group says cutting after installation voids the warranty with almost all major UK brands. A Sussex fitter says any remaining warranty will likely be void. Other firms say a factory fit or an approved fitter keeps cover. So the answer depends on your door maker, and you need it in writing.

Should you order the door with the opening already cut?

If you are buying a new door, we think this is the cleanest route. A factory-cut opening is made by the maker, who can finish and seal the edges as part of the build. Ask how they do it and what the warranty covers. Some makers offer it and others do not, so ask before you order. Some retailers also sell a slab with the hole already cut, so you can fit the flap later. Tell them the exact model and cut-out size, for example 165 x 171 mm for the SureFlap or 178 x 204 mm for the Cat Mate 355W.

How thick is a composite door, and does that matter for the flap?

Composite slabs are typically 44 mm for GRP foam doors and 44 to 48 mm for solid timber core doors. The slab sits in a frame of about 70 mm. Screwfix gives 44 to 48 mm for the slab. That is comfortably inside the Cat Mate's 100 mm self-lining range and shorter than the 70 mm SureFlap tunnel. You do not need tunnel extenders or wall liners for a normal composite door. Those parts are for walls.

What about metal reinforcement and the microchip reader?

Composite doors contain steel or aluminium reinforcement at stress points. Keep the hole away from it for strength and for the reader. A Sussex fitter notes that most microchip flap makers recommend a larger hole in metal doors, otherwise the RFID field can be weaker. That advice is about aluminium doors. We found no maker statement about composite slabs, so check your flap manual and ask the door firm where the reinforcement runs.

Is retrofitting reversible?

No. Once the slab is cut, removing the flap leaves a hole. A fitter in Sussex says a composite slab would have to be replaced or over-boarded. A uPVC door is different: its panels can be swapped. If you rent, or might sell soon, take that into account. The same fitter quotes supply and fit from £149 including VAT for a composite door. That is one fitter's price, not a market average.

Is there an alternative to cutting the door?

Yes. One installer suggests that if you want to retrofit, you might be better off fitting the flap elsewhere. A conservatory door, patio door or an external wall are possibilities. Glass needs a toughened unit made with the hole in it, as it cannot be cut after manufacture. Check any warranties that apply to that part of the house too.

FAQ

Will a cat flap void my composite door warranty?

Often yes if you cut the door after installation. Several UK door firms say so, while others say a factory fit or approved fitter keeps cover. Ask your door maker and keep the reply in writing.

What size hole does a SureFlap need?

165 x 171 mm in a door. The flap opening is 142 x 120 mm. The tunnel is 70 mm long. Use the supplied template.

What size hole does the Cat Mate Elite 355W need?

178 x 204 mm in a door. The flap opening is 145 x 145 mm. It self-lines up to 100 mm.

How thick is a composite door slab?

Usually 44 mm for GRP foam doors and 44 to 48 mm for solid timber core doors, set in a frame of about 70 mm.

Can I remove the cat flap later?

You can remove the flap, but the hole stays. One Sussex fitter says the slab would have to be replaced or over-boarded.

Do I need a tunnel extender?

Not for a standard composite slab. SureFlap extenders add 50 mm each and are meant for walls. Cat Mate wall liners are also for thicker walls.

More guides

Sources

Last checked: