☰ Menu
FlapFit UK › Guides
Fits your door, your wall, your cat

Cat flap for double glazing: which models fit and what hole to order

You can fit a cat flap in double glazing, but not into the unit you have now. The hole has to be made when a new sealed unit is manufactured, so the flap model and hole size must be fixed before you order the glass. The table below shows the glass hole, adaptor and thickness limit for the most common UK models, taken from manufacturer and retailer specs.

Find your match →
Independently researchedSources linkedNo extra cost to youLast checked: 2026-11-18

As an Amazon Associate we earn from qualifying purchases. This does not change your price.

Find a cat flap for your sealed unit in four questions

  1. Is the glass already in the frame and toughened?Then it cannot be drilled or cut on site. Plan a new sealed unit with the hole made at manufacture. The frame can usually stay. If the unit is already being replaced, this is the cheapest moment to add the hole.
  2. How thick is the sealed unit?Measure the unit edge to edge, not just the visible glass. Many units are 20, 24 or 28 mm. Triple glazing is thicker, so check the flap's self-lining limit. The Cat Mate 210 stops at about 30 mm, the Elite 355 at 100 mm.
  3. Do you need microchip control, and how big is your cat?Microchip models (SureFlap, PetSafe, Cat Mate Elite 355) keep other cats out. The Cat Mate 210 and Pet-Tek models are manual 4-way locks. For large cats such as Maine Coons, compare flap opening size first, then the hole.
  4. Do you want a flap that needs an adaptor?SureFlap and PetSafe need a mounting adaptor in glass. The adaptor also hides a hole that is a little bigger than the minimum. Cat Mate and Pet-Tek flaps fit the hole directly, so the glazier must hit the stated diameter.

Quick reference

ModelHole in glass (diameter)Adaptor needed in glass?Panel thicknessFlap opening (W x H)Note
SureFlap Microchip Cat Flap (also Connect, DualScan)212 mm optimum, up to 260 mm with adaptorYes, Cat Flap Mounting Adaptor (outer diameter 285 mm)Tunnel depth about 70 mmSee manualAdaptor covers holes from 212 to 260 mm, so small glazing tolerances are less cr
Cat Mate Elite 355W Microchip with Timer232 mmNo, per retailer and manualSelf-lining to 100 mm145 x 145 mmUp to 9 cats. Manual says a new glass panel is needed for existing double glazin
Cat Mate 210W Glass Fitting (manual 4-way lock)223 mmNoSelf-lining to about 30 to 32 mm145 x 145 mmNo microchip. Shallow, suits patio and conservatory doors
Cat Mate Large Glass Fitting283 mmNoSelf-lining to 50 mm180 x 180 mmLarger cats and small dogs up to 360 mm shoulder height, per Closer Pets
PetSafe Microchip Cat Flap260 mm with adaptor per PetSafe support. Sources differ, see noteYes for double glazing, Installation Adapter sold separatelyTunnel depth 72 mm. One UK retailer lists the adapter for 20, 24 and 28 mm unitsSee manualPetSafe support gives 260 mm, an older manual says 212 mm, a retailer kit says 2
Pet-Tek Catwalk Maxi Dual Glaze (G-SDDC)267 mmNo3 to 28 mm195 x 185 mmPolycarbonate. Pet-Tek lists large cats and small dogs. Its page also says 27 mm

Our picks

Top pick

SureFlap Microchip Cat Flap with Cat Flap Mounting Adaptor

For: Households with one or several cats that need microchip control and want a forgiving glass hole

SureFlap's own spec asks for a 212 mm hole and accepts up to 260 mm with the adaptor, so a slightly oversized hole still sits neatly. The adaptor is a separate purchase and is required in glass. The same adaptor works with the DualScan and Connect versions.

Price range: Check current price on Amazon. Flap and

View on AmazonAd
Cat Mate Elite Microchip Cat Flap with Timer Control 355W
Illustration

Cat Mate Elite Microchip Cat Flap with Timer Control 355W

For: Small to average cats, curfew wanted, thick or triple-glazed units

Fits straight into a 232 mm hole without an adaptor, and the self-lining depth of 100 mm covers most sealed units. The glazier has to make the hole to size, since there is no adaptor to hide errors.

Price range: Check current price on Amazon

View on AmazonAd

Cat Mate 210W Glass Fitting Cat Flap

For: One cat, no microchip needed, patio or conservatory door with a standard 20 to 28 mm unit

The smallest hole of the Cat Mate and Pet-Tek models at 223 mm, with a simple manual 4-way lock. It is limited to panels of about 30 to 32 mm, so it is not for triple glazing.

Price range: One UK retailer lists it from about £17.

View on AmazonAd

Cat Mate Large Glass Fitting Cat Flap

For: Larger cats and small dogs in a standard glazed door

Flap opening of 180 x 180 mm and a 283 mm round cut-out. Self-lining only to 50 mm, so measure the unit and check the depth.

Price range: Check current price on Amazon

View on AmazonAd

PetSafe Microchip Cat Flap with Installation Adapter

For: Cats up to 8 kg and 150 mm shoulder width, where a PetSafe flap is already preferred

Works in double glazing only with the Installation Adapter. The published hole sizes differ between PetSafe support, the manual and retailers, so read the quick start guide for your version and have the glazier confirm the diameter in writing.

Price range: Check current price on Amazon. Adapter i

View on AmazonAd

Pet-Tek Catwalk Maxi Dual Glaze Glass Fitting Pet Door (G-SDDC)

For: Large cats such as Maine Coons, or small dogs, in a new sealed unit

Flap opening of 195 x 185 mm and a 267 mm hole, no adaptor. It is a manual lock and the maker says it needs a professional glazier and a unit made with the hole in place.

Price range: Check current price. Often sold through

View on AmazonAd

Our take

We have not tested these flaps, so this is a view based on specs and manuals. For a microchip flap in a new sealed unit, we would choose the SureFlap with its mounting adaptor if the glazier's hole tolerance worries you, because the adaptor accepts holes from 212 to 260 mm and hides small errors. We would choose the Cat Mate Elite 355W if you want a timer, a thick or triple-glazed unit, and no adaptor, as long as the glazier holds 232 mm exactly. The Cat Mate 210W is the simple, low-cost pick for one cat and a standard unit up to about 30 mm. We would only buy the PetSafe if you already prefer it, and then only after the maker has confirmed the hole size in writing, since the published figures disagree. For large cats we would start with Pet-Tek's G-SDDC or the Cat Mate Large and check the shoulder width before anything else.

Common buying mistakes

  • Ordering the sealed unit before the flap model is final. The hole size depends on the model and on whether you use an adaptor.
  • Taking the hole size from a shop listing instead of the manual for your exact version. PetSafe figures in particular differ between sources.
  • Forgetting the mounting adaptor for SureFlap or PetSafe. Both need it in glass.
  • Measuring only the visible glass. The flap tunnel has to cover the whole unit, including both panes and the frame edge.
  • Choosing a Cat Mate 210 for triple glazing. Its self-lining depth is about 30 to 32 mm.
  • Placing the hole too high or too low. The bottom of the hole should sit roughly level with your cat's belly.

Good to know

Can I have a hole cut in my existing double glazing?

No. Toughened glass cannot be cut or drilled after toughening, and a sealed unit cannot be drilled once it is made, so the hole has to be made when the glass is manufactured. Panes in doors and low-level glazing are usually toughened safety glass. PetSafe, Cat Mate and SureFlap all say this in their instructions. The route is a new sealed unit made with the hole in place. The frame normally stays, and the glazier swaps the unit. Because the unit is made to order, expect a wait between survey and fitting. Ask your glazier for the lead time before you book.

What should I tell the glazier before they order the unit?

Give them four things in writing: the exact flap model, the hole diameter from that model's manual, whether an adaptor is used, and the height of the hole. Put the bottom of the hole roughly level with your cat's belly, and check the height advice in your model's manual. Also ask how the edge around the hole will be sealed. SureFlap's manual advises against metal in the seal around the hole, because it can interfere with the microchip reader. Check the exact wording in the manual for your model.

Does the thickness of the sealed unit matter?

Yes. The flap's tunnel has to span the whole unit. The Cat Mate 210 is self-lining to about 30 to 32 mm, which covers standard units but not triple glazing. The Elite 355 is self-lining to 100 mm. The SureFlap tunnel is about 70 mm deep, and the Pet-Tek G-SDDC is listed for glass of 3 to 28 mm. Measure the finished unit including both panes and the spacer, then compare with the limit in the manual.

Microchip or manual flap in glass?

If a neighbour's cat or a visiting fox is the problem, a microchip model is the sensible choice. SureFlap reads the microchip your vet implanted. Cat Mate's Elite 355 and the PetSafe flap work the same way. If only your cat uses the door, a manual 4-way lock such as the Cat Mate 210 is simpler and cheaper, and it has no batteries to change. The unit is made to order and the hole cannot be changed later, so settle the flap type before the glass is ordered.

Why do the quoted hole sizes differ between shops?

Retailers sometimes quote the hole for a kit or an older version of the manual. PetSafe is the clearest case: its support page gives 260 mm for use with the adaptor, an older manual gives 212 mm, and one retailer lists 275 mm for its kit. Always use the figure in the instructions that come with your exact flap, or ask the maker, and have the glazier confirm the diameter on the order.

What others say

Please note: the pet door cannot be installed into an existing tempered glass or double glazed window.
Pet-Tek Superior Pet Doors (G-SDDC product page)

Our view: Correct, and it applies to every brand. SureFlap, PetSafe and Cat Mate say the same in their manuals. What the page does not tell you is the hole size for other models, which is what the table above covers.

For existing toughened/multiple glazing, a new panel will be required.
Closer Pets (Cat Mate Large Glass Fitting Cat Flap)

Our view: Accurate for the Cat Mate range. The page lists a 283 mm cut-out and self-lining to 50 mm for the large model but gives no help on choosing between Cat Mate models for double glazing. Note that the 50 mm limit is much lower than the 100 mm of the Elite 355.

Toughened glass cannot be cut or drilled after toughening
Can You Put a Cat Flap in Double Glazing? UK Guide

Our view: Correct. The page is an installer's quote page, so it says little about comparing models or hole sizes. It also names the 212 mm SureFlap hole without the 260 mm upper limit.

FAQ

Can you put a cat flap in double glazing?

Yes, but only in a new sealed unit that is made with the hole already in it. Existing double glazing cannot be cut on site.

What size hole does a SureFlap microchip cat flap need in glass?

SureFlap gives 212 mm as the optimum diameter, and the Cat Flap Mounting Adaptor covers holes up to 260 mm. The adaptor is required in glass.

Do Cat Mate flaps need an adaptor in glass?

The Elite 355W and the 210W do not. They fit a round hole directly. The 355W needs 232 mm and the 210W needs 223 mm, according to Cat Mate's own instructions and support pages.

Which cat flap suits a large cat in double glazing?

Look at the flap opening first. The Pet-Tek G-SDDC has 195 x 185 mm and the Cat Mate Large has 180 x 180 mm. Measure your cat's shoulder width and height, and note the Cat Mate Large is listed up to 360 mm shoulder height.

Can I fit a cat flap in triple glazing?

Possibly, but check the thickness limit. The Cat Mate Elite 355 is self-lining to 100 mm. The Cat Mate 210 is limited to about 30 to 32 mm. Ask the maker if your unit is thicker than the stated limit.

More guides

Sources

Last checked: